Do you have any questions?
We have the answers!
General Questions
With the purchase of a LARDIS:ONE, lifetime map/software updates are included. There are no ongoing costs!
In case you want to operate more than one radio, we have developed LARDIS:PILOT. With this you have the possibility to display and operate up to 6 radios in the familiar LARDIS:ONE way. For more information about LARDIS:PILOT please contact your trusted dealer.
Please contact your specialist dealer who will send your device to us in the event of a defect. Direct shipments cannot be considered for technical reasons.
LARDIS:ONE already supports all common data formats. However, if yours is not yet included, we will be happy to implement it for you. Please contact your specialized trade partner for this purpose.
LARDIS:ONE is used for convenient operation of a single radio, with status handling and navigation. For this purpose, the radio is connected directly to the LARDIS:ONE and does not require an additional box.
LARDIS:PILOT, on the other hand, is connected to a LARDIS system via the LARDIS Box and offers the possibility to operate up to 6 radios via an extra menu. The interface, navigation and status handling is similar to a LARDIS:ONE.
The LARDIS:ONE setup automatically checks for new updates for your device. As soon as a new version is available, a corresponding note is displayed when the application is started.
If this is activated, the corresponding icon appears for a sent status if the confirmation is configured correctly. The format of the confirmation can be determined by comparing it with the incoming SDS acknowledgement and then configured respectively.
If status messages have already been sent via the LARDIS:ONE, you will find corresponding confirmations in the setup under "Status" -> "ACTIONS" -> "Export events". If you need help with this, please contact your installation partner.
We sell LARDIS:ONE exclusively through reseller partners, all of whom you can find in our distributor network.
LARDIS:ONE
With heated or tinted windows, there can be occasional failures with a low signal. In this case, only a GPS repeater will help, since there is no external connection for GPS antennas.
The connection cable of the Garmin Fleet 6xx/7xx is not compatible with the new 2022 hardware. With a hardware upgrade, a corresponding connection cable is supplied, which must be installed between the cradle and the radio.
Yes it is possible. Up to 3 inputs and one output can be easily implemented using a GPIO push button adapter (article: LAR-1164).
Via LARDIS:ONE level converter (article: LAR-1163) it is possible to connect a POCSAG receiver with serial interface to LARDIS:ONE. To receive mission messages via SMS, use the new LARDIS:ONE (Mini) or LARDIS:ONE 7plus with integrated 3G modem.
Maps can be installed / updated via USB using the setup software. Already installed maps are checked for up-to-dateness and displayed with a note in the setup after expiration.
The map management can be found in the setup under ACTIONS -> Manage maps or in the loaded configuration.
All maps are first downloaded to the computer and can then be installed on the LARDIS:ONE (mini) (or more). For downloading to the computer it is not necessary to connect the LARDIS:ONE (mini).
There is a mini-USB jack on the cradle above the connection cable, which can be used to connect POCSAG receivers or controls, among others, via an included OTG adapter.
Please note that additional connection cables may be required depending on the component. Please contact our sales partners for more information.
Under the following link you will find the installation instructions / connection description for external control elements or POCSAG receivers: Open link
LARDIS:ONE 7
With heated or tinted windows, there can be occasional failures with a low signal. In this case, only a GPS repeater will help, since there is no external connection for GPS antennas.
Yes, via the item "Settings - Navigation - Route preferences - Custom avoidances", roads and areas can be excluded from the routing in general.
Yes it is possible. Up to 3 inputs and one output can be easily implemented using a GPIO push button adapter (article: LAR-1164).
Bluetooth radios from Motorola and Sepura can already be easily paired with LARDIS:ONE.
Have the activation of the PEI interface checked by your radio workshop/TTB. There are federal states in which the required interface is only activated upon request.
Via LARDIS:ONE level converter (article: LAR-1163) it is possible to connect a POCSAG receiver with serial interface to LARDIS:ONE. To receive mission messages via SMS, use the new LARDIS:ONE (Mini) or LARDIS:ONE 7plus with integrated 3G modem.
When using a MTP850 in connection with org. carkit and LARDIS:ONE, a hotfix must be installed so that the serial communication works. With the MTP850, RTS/CTS is now active by default and cannot be set to "Hardware Flow Control: NONE" via CPS, but only with a hotfix.
This hotfix is available as MTP850_MR14-MR18_No_Flow_Control_on_PEI.hfx to the respective programming entities.
The LARDIS-ONE video adapter 1 (LAR-1150) has an FBAS input in the form of an RCA socket for connecting external rear view cameras. The device switches automatically to the video image display as soon as a valid video signal is received from the camera. Unfortunately, the wireless GARMIN BC30 and BC40 system cameras are not supported by the GARMIN navigation device used.
Additional note: For connection, please be sure to use the connection cable included with the video adapter. The connection cables of the previous LARDIS-ONE 760V devices are unfortunately not compatible.
You have 2 options:
- Display the OPTA via the options menu.
- Use LARDIS:ONE Setup to create an appropriate phone book for your device.
Attention: With firmware versions 8.70 / 8.80 there may be problems in connection with the serial interface. These versions should be omitted in this respect at present.
To update the Garmin firmware or maps, you need the Garmin Express application. You can find this directly on the Garmin website: https://www.garmin.com/en-GB/software/express/windows/
IMPORTANT:
During the entire update, a secure power supply to the device must be ensured, as otherwise irreparable damage to the device may occur. Please ensure that either the device battery is fully charged and still intact in terms of capacity, or power the device via the original Garmin accessories consisting of magnetic holder (cradle) as well as properly powered LARDIS:ONE connection cable. The use of third-party components such as external USB chargers or USB power banks does not represent a safe power supply!
Using the GARMIN POI loader, you can transfer corresponding POI files to your device. Likewise, the matching symbol can be added. For more info, please visit: GARMIN POI Loader
LARDIS:ONE mini
The connection cable of the Garmin Fleet 6xx/7xx is not compatible with the new 2022 hardware. With a hardware upgrade, a corresponding connection cable is supplied, which must be installed between the cradle and the radio.
Maps can be installed / updated via USB using the setup software. Already installed maps are checked for up-to-dateness and displayed with a note in the setup after expiration.
The map management can be found in the setup under ACTIONS -> Manage maps or in the loaded configuration.
All maps are first downloaded to the computer and can then be installed on the LARDIS:ONE (mini) (or more). For downloading to the computer it is not necessary to connect the LARDIS:ONE (mini).
